Side Shift Shredders          

There are 5 models in the TEN series from 180 cm to 280 cm width. Can be ordered for forward or rear mounting  with trailing rollers and choice of universal or hammer blades, power range 50 to 80 HP. Require 540 PTO and hydraulic service. Suitable to shred prunings up to 6 cm diameter.

Model TEN 180 weight 530 Kg, cutting width 175 cm, W194xH95xD90cm, requires 50 HP

Model TEN 200 weight 550 Kg, cutting width 195 cm, W214xH95xD90cm, requires 60 HP

Model TEN 220 weight 610 Kg, cutting width 215 cm, W234xH95xD90cm, requires 65 HP

Model TEN 250 weight 690 Kg, cutting width 245 cm, W264xH95xD90cm, requires 70 HP

Model TEN 280 weight 770 Kg, cutting width 275 cm, W294xH95xD90cm, requires 80 HP

There are 7 models in the ER series from 130 to 280 cm width. They can be mounted at the front or rear of the tractor. Starting smaller and all slightly lighter than the TEN range above but will still tackle 6 cm diameter prunings. Choice of universal or hammer blades. With or without hydraulic shifting.

Model ER 130 weight 372 Kg, requires 20 to 30 HP

Model ER 160 weight 412 Kg, requires 30 to 40 HP

Model ER 180 weight 432 Kg, requires 40 to 50 HP

Model ER 200 weight 460 Kg, requires 45 to 55 HP

Model ER 220 weight 505 Kg, requires 50 to 60 HP

Model ER 250 weight 540 Kg, requires 60 to 70 HP

Model ER 280 weight 590 Kg, requires 70 to 80 HP

There are also several other ranges that can be obtained for special circumstances, some lighter and some with special attachments. Please contact our office to discuss your requirements.

back to Highway, Ground & Grass Care main page