Turbo Belt Elevators

The Rekord Europ-Turbo range of high specification general purpose farm elevators is designed to offer high capacity combined with gentle handling and trouble-free operation

• The range comprises three models - 8.0m, 10.0m and l2.0m in length and standard features include :-

• Tough, 60cm wide, reinforced rubber belt with full width 35mm deep, chevron style, moulded rubber cleats.

•   Using a unique system of adjustable rollers, the elevator can be used either as a troughed or flat belt.

•   Easy change drive system gives three belt speeds - 30, 50 and 88 metres per minute.

•   Separate 1 hp electric motor drives the hydraulic system which provides the power to the hydraulic rams used to control elevator height adjustment.

•   Twin, side-mounted hydraulic rams eliminate any risk of distortion of the elevator bed and give smooth and easy lifting.

• A manually adjusted ‘swan-neck’ section at the discharge end of the elevator gives a reduced drop to avoid spillage and guard against the risk of damage to susceptible crops.

•  Robust undercarriage with large diameter rubber tyred wheels with castor arrangement for easy maneuverability.

•   Detachable drawbar for easy movement from site to site.

•   Suitable for a wide range of bulk farm produce such as grains, potatoes, onions, cider apples and a wide variety of other products in bulk, bags or bales.

•   The elevator can be powered by either single or three-phase electric motors or a petrol driven engine.

•   A round, rubber covered receiving hopper to suit conveyors or grain chutes is fitted as standard equipment. A full width hopper to suit tipping trailers is available as an optional extra.

To the left - Round rubber receiving hopper standard. To the right - Both the tension of the drive belt and speed of the main elevator belt can be quickly and easily adjusted using the tensioning screw and choice of drive pulleys.

To form a troughed belt the the carrying rollers are located in the raised position. For flat belt operation, the carrying rollers are located in the lower position.

To the left - A detachable drawbar for ease of movement site to site. To the right - The wheels castor to enable easy lateral movement.

To ensure that the Europ-Turbo elevator is a truly versatile performer, there are a range of optional attachments.   These are shown on the next page together with specifications.

Page Top

back to Field & Stock Machinery main page