Westfield MK Series Grain Augers
| Belt Conveyors | WR Augers | Utility Augers | Grain Loop | Super-Flo |
At Last! A practical and economical mechanical drive swing-hopper auger that is simple, uncomplicated, efficient and affordable. They are available as MK 80 ( 8"diametre ), MK 100 ( 10") and MK 130 ( 13") with lengths from 51 feet to 110 feet and outputs up to 200 tons per hour.
 |
Operate the tractor control and smoothly raise the MK in less than a minute. One person can transport, raise and position the auger from the tractor seat. |
 |
Our lift assist and double roller track-shoe reduces pressure needed to raise the auger and provides a lower transport position. A shut-off valve in the hydraulic line prevents auger from creeping down. | The 4” hydraulic cylinder has heavy 5/16” steel lift cable with 9,800 lbs. yield strength. The cables run in large cast iron cable sheaves equipped with bronze bushings. |
|
| A Westfield design constant velocity angle-drive replaces the u-joint in the feed hopper, eliminating velocity fluctuation vibrations for smoother running and less stress on the drive train. |
|
 |
The Constant Velocity (CV) PTO shaft, equipped with overload shear bolt, is standard equipment. It assures smooth operation and longer wear. (Shown with shield partially removed to show detail.) |
 |
Our long, lower-profile swing hopper, quickly switched to right or left-hand operation and fits under most grain trailers. The vertical transport position provides quick and easy cleanout. | Spring-loaded safety discharge door on the intake hopper guards against main auger overloading. |
|
All the MK series are made in lengths of 51, 61 and 71 feet and the MK 100 and MK 130 are also made in 91 and 110 feet lengths. Please follow the hyperlinks to see more features of the larger models or a table of specifications for the MK range.
back to Elevators & Conveyors main page
